Wlx 893u2is Driver 15
Wlx 893u2is Driver 15: A Review of the Best Driver for Your HDD Docking Station
If you have a WLX-893U2IS HDD docking station, you may need to download and install the driver for it to work properly with your computer. The WLX-893U2IS is a multi-function docking station that supports SATA and IDE hard drives, as well as card readers and USB hubs. It can also clone hard drives without connecting to a computer. In this article, we will review the Wlx 893u2is Driver 15, which is the latest and most compatible driver for your docking station. We will also show you how to download, install, and use the driver effectively.
What is the Wlx 893u2is Driver 15?
The Wlx 893u2is Driver 15 is the software that enables your computer to communicate with your WLX-893U2IS docking station. It allows you to access, backup, or clone your hard drives easily. The driver also provides some additional features, such as OTB (one touch backup) function, LED indicator control, and power management. The Wlx 893u2is Driver 15 is compatible with Windows XP, Vista, 7, 8, 8.1, and 10 operating systems. It supports both 32-bit and 64-bit versions.
Download: https://urlca.com/2w34bX
How to Download and Install the Wlx 893u2is Driver 15?
The Wlx 893u2is Driver 15 is available on the official website of Shen zhen WanLongXin Electronic Technology Co.,LTD , the manufacturer of the docking station. You can find it under the "Download" section, along with other drivers for different models of docking stations. The driver file name is "WLX-893U2IS_OTB.zip". You can download it by clicking on it and saving it to your computer.
Once you have downloaded the driver file, you need to unzip it and run the setup.exe file. Follow the instructions on the screen to install the driver. You may need to restart your computer after the installation is complete. After that, you should be able to use your WLX-893U2IS docking station with your computer.
How to Use the Wlx 893u2is Driver 15?
The Wlx 893u2is Driver 15 provides a user-friendly interface that allows you to manage your docking station and hard drives easily. You can access the interface by clicking on the "WLX-893U2IS" icon on your desktop or system tray. The interface has four tabs: "Main", "Backup", "Clone", and "Setting".
The "Main" tab shows you the status of your docking station and hard drives. You can see the model, capacity, temperature, and health of your drives. You can also perform some basic operations, such as format, scan, eject, or refresh.
The "Backup" tab allows you to backup your data from one drive to another or to a specified folder on your computer. You can choose between full backup or incremental backup modes. You can also schedule your backup tasks or use the OTB button on your docking station to start a backup instantly.
The "Clone" tab enables you to clone your hard drive without connecting to a computer. This can be useful if you want to upgrade your hard drive, backup your data, or transfer your files to another device. Cloning a hard drive means making an exact copy of it, including the operating system, applications, and settings. To clone a hard drive with the WLX-893U2IS docking station, you will need two hard drives: the source drive and the target drive. The source drive is the one that contains the data you want to copy, and the target drive is the one that will receive the copy. The source and target drives can be either SATA or IDE, but they must have the same interface and size. For example, you cannot clone a SATA 3.5 inch drive to an IDE 2.5 inch drive. Before you start cloning, make sure that both drives are formatted and have no bad sectors. You can use a disk utility software to check and repair your drives if necessary. Also, make sure that the target drive has enough space to hold all the data from the source drive. To start cloning, follow these steps:
Insert the source drive and the target drive into the docking station. Make sure that they are properly connected and recognized by the docking station.
Press and hold the OTB button on the docking station for about 3 seconds. The LED indicator will flash blue and red alternately, indicating that the cloning process is starting.
Wait for the cloning process to finish. The LED indicator will stop flashing and turn solid blue, indicating that the cloning process is complete. You can also check the progress bar on the "Clone" tab of the interface.
Eject the drives from the docking station. You can now use the target drive as a bootable drive or as a backup drive.
The "Setting" tab allows you to customize some settings of your docking station and driver. You can change the language, sound, theme, update, and other options.
Conclusion
The Wlx 893u2is Driver 15 is the best driver for your WLX-893U2IS docking station. It provides a simple and effective way to access, backup, or clone your hard drives. It also offers some additional features, such as OTB function, LED indicator control, and power management. The driver is easy to download, install, and use. It is compatible with most Windows operating systems and supports both SATA and IDE hard drives. If you have a WLX-893U2IS docking station, you should definitely get the Wlx 893u2is Driver 15 to enhance your experience.